Wet-stick

Home > Projects > Wet-stick

Special Hydrophilic Resin for Wet and Underwater Repairs

About

Wet Stick Epoxy Putty is a fast-setting, fibreglass-reinforced polymer compound that enables permanent repairs to many surfaces including fibreglass, concrete, glass, metals, wood, and many plastics. It is specially formulated to adhere to surfaces exposed to damp, wet or underwater (salt or fresh) conditions.

Each handy stick contains pre-measured portions of activator and base throughout – no measuring or mixing tools are necessary. As the epoxy is mixed, the two contrasting colours blend into one colour to indicate complete mixing. Superfast Aqua-Stick contains a fading green dye and becomes white after mixing. The consistency eliminates drips and runs, facilitates adhesion to the substrate, and allows the material to be shaped and formed as needed before curing begins. Once cured, Wet Stick can be drilled, sawed, carved, sanded or painted.

Suitable for interior or exterior use, it is resistant to water, chemicals, and temperature extremes. Wet Stick contains no solvents or VOC’s. It’s non-flammable and releases no noxious fumes. It won’t shrink or pull away. The unused portion stays fresh for future use when saved in its original package.

Wet Stick has a work life of approximately 15 minutes. Within 20-30 minutes it will harden and form a cohesive bond. After 1 hour, the system can be put back into service.

    Used extensively in Transport for Petrol & Diesel

    Typical applications:

    • Tank leaks
    • Steam pipes
    • Cracked Electrical Insulators etc