Steel-stick

Home > Projects > Steel-stick

Strong Rapid Repairs to Metallic Surfaces

About

Superfast Steel-Stick contains steel for hard, fast-setting repairs. This industrial-strength polymer compound will give permanent repairs to anything made of steel or other metals. It also bonds to wood, glass, masonry, and many plastics.

Each handy stick contains pre-measured portions of activator and base throughout – no measuring or mixing tools are necessary. As the epoxy is mixed, the two contrasting colours blend into one colour to indicate complete mixing. The consistency eliminates drips and runs, facilitates adhesion to the substrate, and allows the material to be shaped and formed as needed before curing begins. Superfast Steel-Stick cures to a dark grey metallic colour. Once cured, it can be tapped, drilled, screwed, sawed, machined, ground, filed, or painted, and does not rust.

Suitable for interior or exterior use, it is resistant to water, chemicals, and temperature extremes. Superfast Steel- Stick contains no solvents or VOC’s. It’s non-flammable and releases no noxious fumes. It won’t shrink or pull away. The unused portion stays fresh for future use when saved in its original package.

Superfast Steel-Stick has a work life of approximately 3 minutes. Within 5-10 minutes it will harden and form a cohesive bond. After 1 hour, the system can be put back into service and full properties are achieved in 24 hours.